• Exterior design by Flemming E. Rasmussen • Electronics design by Tom Møller • Dual mono configuration • Zero global negative feedback • 440,000 μF (Stereo) or 880,000 μF (Mono version) capacitor bank • Balanced dual differential Class A input circuitry followed by a high-speed voltage amplifying Class A stage • Fully regulated low noise power supply for all voltage amplifying stages • DC servo coupling • Frequency-independent damping factor • Polypropylene capacitors for local power supply decoupling • Four-layer up to 70 μm copper printed circuit boards • Custom-made 1350 VA toroidal transformer • Separate power supply for digital and analog circuits • Soft Start turn-on prevents triggering of fuses in the home electrical system • Gold-plated Neutrik XLR socket for one balanced input per channel • Gold-plated custom-built binding posts • 12 V DC link for power up and down • Automatic Green Bias setting or manual Low/High bias • Flash memory upgrades via PC or Key-fob • Non-invasive protection system • RGB LED bar indicating Bias High / Low status. • Standby current consumption < 0.5 W • EU CE approval • Designed and built in Denmark Specifications: Stereo version • 2 x 50W @ 8 Ω, 2 x 100W @ 4 Ω, 2 x 190W @ 2 Ω at 115V/230V AC supply • 20 very high current bipolar output transistors • Output impedance: 0.015 Ω • Bandwidth (-3dB): 0.3 Hz to 350 kHz • Power supply capacity (both channels): 440,000 μF • Gain: +31.0 dB • Input impedance, balanced (20 Hz-20 kHz): 20 kΩ Dimensions: • 47 x 24 x 46 cm (WxHxD), 45 kg net. All specifications are subject to change without notice.