Dynaudio Evoke 50 Speakers The Evoke range benefits directly from trickle-down cutting-edge technology directly from the Contour and all-new Confidence ranges. Ultra-high build, finish quality and traditional, elegant subtly curved cabinets with hidden screws provide a significant touch of class to these fresh "ground-up" designs. The Cerotar tweeter is making its debut in Evoke. It’s a brand-new, ground-up design based on the award-winning Esotar Forty anniversary tweeter and the mighty Esotar3 found in the new, money-no-object Confidence series. Underneath the 28mm soft-dome diaphragm sits the Hexis inner dome (something you’ll currently only find in Confidence). This refines the airflow behind the tweeter’s playing surface to smooth-out its frequency response and eliminate unwanted resonances. Behind it all, the new motor system uses strontium carbonate Ferrite+ ceramic magnets to further increase tweeter sensitivity. The Esotec+ woofers use MSP (Magnesium Silicate Polymer) in their diaphragms – just like all Dynaudio speakers have done since 1977. The versions used in Evoke 10, 20, 30 and 25C use new surrounds and improved Ferrite+ magnet systems to extend their throw, their frequency response and their low-frequency dynamics – all while maintaining stellar midrange performance. The larger 18cm driver in Evoke 50 borrows technology from both the Contour and Confidence ranges to deliver eyebrow-raising low-frequency dynamics and timing.
Sensitivity: 87dB (2.83V/1m) IEC power handling: 260W Impedance: 4 Ω (3 Ω minimum @100Hz) Frequency response (±3dB): 35Hz–23kHz Box principle: Bass reflex rear ported Crossover: 3-way Crossover frequency: 430/3500Hz Crossover topology: 3rd/2nd order Woofer: 2x18cm MSP cone Midrange: 15cm MSP Tweeter: 28mm Cerotar with Hexis Weight: 26.9kg/59.3lb Dimensions (W x H x D): 215x1140x307mm 8.5x44.9x12.1in Dimensions with feet/grille (W x H x D): 305x1162x373mm 12.0x45.7x14.7in